|
Platen Die Punching Machine with Hot
Foil Stamping Attachment is designed to transfer Gold Foil on Paper, Duplex,
Leather, PP, PVC, etc. The machine is fiited with Heater Plate with single, dual
& multiple heating zone option. Die Cutting job can also be done on this machine
after switching off Hot Foil Unit.
Hot foil stamping machines has an
exclusive touch to brighten attractive and decorative features on Packs, Boxes,
cartons, labels, greetings and wedding cards and other printing items.
National Introduces the most ideal
die cutting & creasing platen press & world class high tech hot foil stamping
device for offset printing & packaging industry matching the international
standards.
What we provide with our Hot Foil Stamping Attachment
with Die Cutting Machine:-
1. Two Tables
Complete.
2. Two Chase.
3. Standard
Service Tool Box which contains all the needed Tools.
4. Machine made
From Graded Casting /Fabricated Steel.
5. All moving
parts on the machine are protected by Approved Safety Guards.
6. The digital
impression counter allows an accurate check to be kept on the number of
impressions made by the Machine.
7. The timing device can be set to give a variable period from 0.5 to
10 seconds. During this time the platen remains stationary in the open position
as well as the close position before automatically resuming motion at the end of
the set dwell period.
8. Wrap Around
Safety Device.
9. Both Side
Hardened and Ground –True Imported Make Ready Plate
10. Automatic
lubrication system.
11. Adjustable
guide system.
12. Trip bar to
stop the Machine Immediately.
13. Side arm
guard.
14. Fly wheel
drive belt full guard.
15.
Electro-Magnetic Clutch and Brake standard with all machines.
Features
Sticker Cutting :- Perfect cut is ideal. The die
blade should cut through the face paper & the adhesive should come to stop just
before the release of paper. We make it cent percent possible by introducing
these features.
Micropressure Adjuster :- To keep uniform
pressure on left & right side of microns.
Steel Rails : - Movable platen runs on special
grade hardened ground steel rails to keep uniform pressure up & down.
Imported Plate : - It is a part of our export
model standard accessories with even surface in microns, which plays key role in
cutting perfect stickers, soft crease, PVC sheets, embossing, perfect hot foil
stamping impression & any precise jobs.
Platen :- Wide opening of platen signifies
operation of feedings.
Full platen size die cuts perfectly because moving platen is designed to give
perfect Punch on each and every parts.
Extra heavy duty clutch wheel, jumbo sized connecting arms, with bronze
phosphorus bushes release platen smoothly and it cuts dies easily.
Hot Foil Stamping Attachment With Die Platen Punching Machine
Hot Foil
Stamping Machine Attachments :- Attachment of hot foil unit with 1 Step,
2 Step, 3 Step or 4 Step.
Heating Plate
(i) Three Chambers heating plate having Three separate compartments with separate
circuit on control panel to operate any of three or all the three compartment at
the same time. It plays key role in minimizing wastage of electricity.
(ii) Holes are provided on complete heating plate to fix blocks with screws
instead of pasting. It gives perfect registration on each & every impression.
(iii) Heating plate is fitted with digital display of the machine with
thermostatically Controlled heaters.
Revinder Unit :- Revinder units are separate for
each foils.
Jumpers :- Jumpers are designed with advanced
technology to minimize wastage of foils.
|
Model |
Foil-National-3 |
Foil-National-40 |
Foil-National-46 |
Foil-National-53 |
|
Platen Size |
25
x35 in |
28
x 40in |
36
x 46in |
39
x53in |
|
Inside Chase |
22
x32 in |
25
x37 in |
32
x42 in. |
36
x50 in. |
|
Impressions per hour(Approx) |
1800 Max |
1700 Max |
1300 Max |
1200 Max |
|
H.P Required |
3H.P |
5 HP |
7.5 HP |
7.5HP |
|
Pressure Exerted during Impression |
180 Ton |
200 Ton |
260 Ton |
300 ton |
|
Floor Space Required |
60 x61 in |
64 x 71 in |
71 x78 in |
73 x85 in |
|
Weight |
3.6
Ton |
4.5
Ton |
5.5
Ton |
6.5
Ton |
Main
Features
Overhead control panel
Three modes of operation:
Single, continuous & timed dwell
Hardened Ground Steel Cutting Plate with quick release for fast make-ready.
Worm gear jam release system (Costs Extra)
Heavy duty quality casting
Micro pressure adjustment
Automatic lubrication system
Safety features:
-
Foot Switch.
-
Trip Bar.
-
Overhead Guard.
-
Knee Guard.
Warrantee:-
Unconditional Warrantee of One Year.
All National Die Cutters with hot foil attachment have
:-
1.Electrical (Control Panel and Remote) of Siemens- Germany Or Schneider-
France.
2. Bearings - Japanese Bearings.
3. Paint - Imported PPG Paint of USA.
4. Graded Castings.
5. Electrical Motor is Siemens -Germany.
The
Following is also supplied with the hot foil stamping attachment with die
cutting machine:
1.Mechnical Drawing Of All Machine Parts And Complete Machine.
2.Electrical Circuit Drawing.
3.Lubrication Circuit Drawing
4.Working Manual.
|
